Christoph Lohr, Anna Trauth, Joél Pascal Schukraft, S. Leher and Kay A. Weidenmann. 2025. Investigation on the recycling potential of additively manufactured carbon fiber reinforced PA 6.6. Composite Structures 352, 118683. DOI: 10.1016/j.compstruct.2024.118683
PDF | BibTeX | RIS | DOI

Nicolas Christ, Benedikt M. Scheuring, Christoph Schelleis, Wilfried V. Liebig, John Montesano, Kay A. Weidenmann and Jörg Hohe. 2024. Characterization and simulation of the interface between a continuous and discontinuous carbon fiber reinforced thermoplastic by using the climbing drum peel test considering humidity. Polymers 16, 7, 976. DOI: 10.3390/polym16070976
PDF | BibTeX | RIS | DOI

Juliane Blarr, Steffen Klinder, Wilfried V. Liebig, Kaan Inal, Luise Kärger and Kay A. Weidenmann. 2024. Deep convolutional generative adversarial network for generation of computed tomography images of discontinuously carbon fiber reinforced polymer microstructures. Scientific Reports 14, 1, 9641. DOI: 10.1038/s41598-024-59252-8
PDF | BibTeX | RIS | DOI

Benedikt M. Scheuring, Nicolas Christ, Juliane Blarr, Wilfried V. Liebig, Jörg Hohe, John Montesano and Kay A. Weidenmann. in press. Experimental and homogenized orientation-dependent properties of hybrid long fiber-reinforced thermoplastics. International Journal of Mechanical Sciences 109470. DOI: 10.1016/j.ijmecsci.2024.109470
BibTeX | RIS | DOI

Kerstin Dittmann, Robert Gruhl, Anna Trauth and Kay André Weidenmann. 2024. In-situ failure behavior and interfacial bonding of an interpenetrating metal matrix composite reinforced with lattice-like metallic glass (Ni60Nb20Ta20) preform. Composite Structures 337, 118084. DOI: 10.1016/j.compstruct.2024.118084
PDF | BibTeX | RIS | DOI

Philipp Eyer, Sarah Enzler, Anna Trauth and Kay André Weidenmann. 2024. Investigating the mechanical properties of polymer samples from different additive manufacturing processes using ultrasonic phase spectroscopy. 3D Printing and Additive Manufacturing 11, 2, e666-e674. DOI: 10.1089/3dp.2022.0148
PDF | BibTeX | RIS | DOI

Kerstin Dittmann, Steffen Czink, Stefan Dietrich, Anna Trauth and Kay André Weidenmann. 2024. Laser-based additive manufacturing and characterization of an open-porous Ni-based metallic glass lattice structure (Ni60Nb20Ta20). 3D Printing and Additive Manufacturing 11, 2, e537-e547. DOI: 10.1089/3dp.2022.0118
BibTeX | RIS | DOI

Kerstin Dittmann, Anna Trauth and Kay André Weidenmann. 2024. Manufacturing and characterization of an interpenetrating metal matrix composite reinforced with a 3D-printed metallic glass lattice structure (Ni60Nb20Ta20). Composite Structures 327, 117697. DOI: 10.1016/j.compstruct.2023.117697
BibTeX | RIS | DOI

Juliane Blarr, Philipp Kunze, Noah Kresin, Wilfried V. Liebig, Kaan Inal and Kay A. Weidenmann. in press. Novel thresholding method and convolutional neural network for fiber volume content determination from 3D μCT images. NDT & E International 103067. DOI: 10.1016/j.ndteint.2024.103067
BibTeX | RIS | DOI

Alexander Jackstadt, Wilfried V. Liebig, Kay A. Weidenmann and Luise Kärger. 2024. On the influence of low-velocity impact damage on constrained-layer damping in hybrid CFRP-elastomer-metal laminates. Materials & Design 241, 112882. DOI: 10.1016/j.matdes.2024.112882
PDF | BibTeX | RIS | DOI

Joél Schukraft, Christoph Lohr and Kay André Weidenmann. 2023. Approaches to X-ray CT evaluation of in-situ experiments on damage evolution in an interpenetrating metal-ceramic composite with residual porosity. Applied Composite Materials 30, 3, 815-831. DOI: 10.1007/s10443-023-10115-x
PDF | BibTeX | RIS | DOI

Lars Eisele, Anselm Heuer, Kay A. Weidenmann and Wilfried V. Liebig. 2023. Can different parameter sets lead to equivalent optima between geometric accuracy and mechanical properties in Arburg plastic freeforming?. Polymers 15, 6, 1516. DOI: 10.3390/polym15061516
PDF | BibTeX | RIS | DOI

Joél Schukraft, Dominik Horny, Frederik Siegmund, Katrin Schulz and Kay André Weidenmann. 2023. Experimental and numerical investigation of the thermal properties and related microstructural influences of an interpenetrating metal ceramic composite at elevated temperatures. Thermochimica Acta 726, 179557. DOI: 10.1016/j.tca.2023.179557
BibTeX | RIS | DOI

J. Blarr, T. Sabiston, C. Krauß, J. K. Bauer, W. V. Liebig, K. Inal and Kay A. Weidenmann. 2023. Implementation and comparison of algebraic and machine learning based tensor interpolation methods applied to fiber orientation tensor fields obtained from CT images. Computational Materials Science 228, 112286. DOI: 10.1016/j.commatsci.2023.112286
PDF | BibTeX | RIS | DOI

Philipp Christopher Morbitzer, Joél Schukraft, Christoph Lohr and Kay André Weidenmann. 2023. In-situ SEM investigation on the damage behavior of an interpenetrating metal ceramic composite. Composite Structures 321, 117278. DOI: 10.1016/j.compstruct.2023.117278
BibTeX | RIS | DOI

Siddhartha Roy, Pascal Albrecht and Kay André Weidenmann. 2023. Influence of ceramic freeze-casting temperature on the anisotropic thermal expansion behavior of corresponding interpenetrating metal/ceramic composites. Journal of Materials Engineering and Performance 32, 8795-8806. DOI: 10.1007/s11665-022-07769-2
BibTeX | RIS | DOI

Moritz Kruse, Henrik O. Werner, Hui Chen, Thomas Mennecart, Wilfried V. Liebig, Kay A. Weidenmann and Noomane Ben Khalifa. 2023. Investigation of the friction behavior between dry/infiltrated glass fiber fabric and metal sheet during deep drawing of fiber metal laminates. Production Engineering 17, 1, 37-46. DOI: 10.1007/s11740-022-01141-y
PDF | BibTeX | RIS | DOI

Dominik Horny, Joél Schukraft, Carolin Pieper, Kay André Weidenmann and Katrin Schulz. 2023. Numerical and experimental investigation on the self‐healing potential of interpenetrating metal–ceramic composites. Advanced Engineering Materials 25, 19, 2300259. DOI: 10.1002/adem.202300259
PDF | BibTeX | RIS | DOI

Anselm Heuer, Maike Rees, Kay A. Weidenmann and Wilfried V. Liebig. 2023. On the creation and optical microstructure characterisation of additively manufactured foam structures (AMF). Polymers 15, 17, 3544. DOI: 10.3390/polym15173544
PDF | BibTeX | RIS | DOI

Joél Pascal Schukraft, Dominik Horny, Katrin Schulz and Kay André Weidenmann. 2022. 3D modeling and experimental investigation on the damage behavior of an interpenetrating metal ceramic composite (IMCC) under compression. Materials Science and Engineering: A 844, 143147. DOI: 10.1016/j.msea.2022.143147
PDF | BibTeX | RIS | DOI

Joél Schukraft, C. Pieper, Christoph Lohr and Kay A. Weidenmann. 2022. Approaches on self-healing of an interpenetrating metal ceramic composite. In Anastasios Vassilopoulos, Véronique Michaud (Eds.). ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, Lausanne, Switzerland, June 26-30, 2022. EPFL Lausanne, Composite Construction Laboratory, Lausanne, 419-426 DOI: 10.5075/epfl-298799_978-2-9701614-0-0
PDF | BibTeX | RIS | DOI

Malte L. Flachmann, Michael Seitz, Wilfried V. Liebig and Kay A. Weidenmann. 2022. Characterization of the corrosion resistance of composite peened aluminum. Journal of Materials Engineering and Performance 31, 4, 3185-3191. DOI: 10.1007/s11665-021-06440-6
PDF | BibTeX | RIS | DOI

Robert Maertens, Wilfried V. Liebig, Kay A. Weidenmann and Peter Elsner. 2022. Development of an injection molding process for long glass fiber-reinforced phenolic resins. Polymers 14, 14, 2890. DOI: 10.3390/polym14142890
PDF | BibTeX | RIS | DOI

M. Bartkowiak, M. Kizak, W. V. Liebig and Kay André Weidenmann. 2022. Fatigue behavior of hybrid continuous-discontinuous fiber-reinforced sheet molding compound composites under application-related loading conditions. Composites Part C: Open Access 8, 100265. DOI: 10.1016/j.jcomc.2022.100265
PDF | BibTeX | RIS | DOI

Anna Trauth, Christoph Lohr, Benedikt Lallinger and Kay A. Weidenmann. 2022. Interface characterization of hybrid biocompatible fiber-metal laminates after laser-based surface treatment. Composite Structures 281, 115054. DOI: 10.1016/j.compstruct.2021.115054
BibTeX | RIS | DOI

Kerstin Dittmann, Anna Trauth and Kay A. Weidenmann. 2022. Investigation and characterization of thermal properties of a metal matrix composite reinforced with a metallic glass foam (Ni60Nb20Ta20). In Anastasios P. Vassilopoulos, Véronique Michaud (Eds.). ECCM 2022 - proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, Lausanne, Switzerland, June 26-30, 2022, volume 3 - Characterization. EPFL Lausanne, Composite Construction Laboratory, Lausanne, 298-305 DOI: 10.5075/epfl-298799_978-2-9701614-0-0
PDF | BibTeX | RIS | DOI

Henrik Werner, Wilfried V. Liebig and Kay A. Weidenmann. 2022. Tensile properties of deep drawn in-situ polymerized fiber-metal-laminates. In Anastasios Vassilopoulos, Véronique Michaud (Eds.). ECCM 2022 - proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, Lausanne, Switzerland, June 26-30, 2022. EPFL Lausanne, Composite Construction Laboratory, Lausanne, 1282-1289 DOI: 10.5075/epfl-298799_978-2-9701614-0-0
PDF | BibTeX | RIS | DOI

Joél Schukraft, Jan Roßdeutscher, Frederik Siegmund and Kay A. Weidenmann. 2022. Thermal expansion behavior and elevated temperature elastic properties of an interpenetrating metal/ceramic composite. Thermochimica Acta 715, 179298. DOI: 10.1016/j.tca.2022.179298
PDF | BibTeX | RIS | DOI

Joél Pascal Schukraft, Christoph Lohr and Kay A. Weidenmann. 2021. 2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg. Composite Structures 263, 113742. DOI: 10.1016/j.compstruct.2021.113742
PDF | BibTeX | RIS | DOI | URL

Vinit Vijay Deshpande, Kay A. Weidenmann and Romana Piat. 2021. Application of statistical functions to the numerical modelling of ceramic foam: from characterisation of CT-data via generation of the virtual microstructure to estimation of effective elastic properties. Journal of the European Ceramic Society 41, 11, 5578-5592. DOI: 10.1016/j.jeurceramsoc.2021.03.054
BibTeX | RIS | DOI

Robert Maertens, Wilfried V. Liebig, Peter Elsner and Kay A. Weidenmann. 2021. Compounding of short fiber reinforced phenolic resin by using specific mechanical energy input as a process control parameter. Journal of Composites Science 5, 5, 127. DOI: 10.3390/jcs5050127
PDF | BibTeX | RIS | DOI

Anna Trauth, K. Kirchenbauer and Kay A. Weidenmann. 2021. Dynamic-mechanical-thermal analysis of hybrid continuous–discontinuous sheet molding compounds. Composites Part C: Open Access 5, 100148. DOI: 10.1016/j.jcomc.2021.100148
PDF | BibTeX | RIS | DOI

Ludwig Schöttl, Kay A. Weidenmann, Trevor Sabiston, Kaan Inal and Peter Elsner. 2021. Fiber bundle tracking method to analyze sheet molding compound microstructure based on computed tomography images. NDT & E International 117, 102370. DOI: 10.1016/j.ndteint.2020.102370
BibTeX | RIS | DOI

Philipp Eyer, J. Dittus, Anna Trauth, S. Coutandin, J. Fleischer and Kay A. Weidenmann. 2021. Improvement of the adhesion in functional NiTi wire/polymer composites made by additive manufacturing. Composite Structures 275, 114455. DOI: 10.1016/j.compstruct.2021.114455
BibTeX | RIS | DOI

Anna Trauth, L. Kehrer, P. Pinter, Kay A. Weidenmann and T. Böhlke. 2021. On the effective elastic properties based on mean-field homogenization of sheet molding compound composites. Composites Part C: Open Access 4, 1191716929. DOI: 10.1016/j.jcomc.2020.100089
PDF | BibTeX | RIS | DOI

Ludwig Schöttl, Wilfried V. Liebig, Kay A. Weidenmann, Kaan Inal and Peter Elsner. 2021. The use of the empirical crack orientation tensor to characterize the damage anisotropy. Composites Communications 25, 100613. DOI: 10.1016/j.coco.2020.100613
PDF | BibTeX | RIS | DOI

Vincent Sessner, Wilfried V. Liebig, Alexander Jackstadt, Dominik Schmid, Tom Ehrig, Klaudiusz Holeczek, Nils Gräbner, Pawel Kostka, Utz von Wagner, Kay A. Weidenmann and Luise Kärger. 2021. Wide scale characterization and modeling of the vibration and damping behavior of CFRP-elastomer-metal laminates — comparison and discussion of different test setups. Applied Composite Materials 28, 5, 1715-1746. DOI: 10.1007/s10443-021-09934-7
PDF | BibTeX | RIS | DOI

Ludwig Schöttl, Dominik Dörr, Pascal Pinter, Kay A. Weidenmann, Peter Elsner and Luise Kärger. 2020. A novel approach for segmenting and mapping of local fiber orientation of continuous fiber-reinforced composite laminates based on volumetric images. NDT & E International 110, 102194. DOI: 10.1016/j.ndteint.2019.102194
BibTeX | RIS | DOI

Siddhartha Roy, Alwin Nagel and Kay A. Weidenmann. 2020. Anisotropic thermal expansion behavior of an interpenetrating metal/ceramic composite. Thermochimica Acta 684, 178488. DOI: 10.1016/j.tca.2019.178488
BibTeX | RIS | DOI

Ludwig Schöttl, Philipp Kolb, Wilfried V. Liebig, Kay A. Weidenmann, Kaan Inal and Peter Elsner. 2020. Crack characterization of discontinuous fiber-reinforced composites by using micro-computed tomography: cyclic in-situ testing, crack segmentation and crack volume fraction. Composites Communications 21, 100384. DOI: 10.1016/j.coco.2020.100384
BibTeX | RIS | DOI

Markus Muth, Florentin Pottmeyer and Kay A. Weidenmann. 2020. Failure behaviour of metal inserts embedded in CFRP subsequent to thermal, mechanical and cyclic pre-damage. Composite Structures 236, 111877. DOI: 10.1016/j.compstruct.2020.111877
BibTeX | RIS | DOI

Joél Schukraft, Christoph Lohr and Kay A. Weidenmann. 2020. Mechanical characterization of an interpenetrating metal-matrix composite based on highly homogeneous ceramic foams. In J. M. Hausmann, M. Siebert, A. von Hehl, Kay A. Weidenmann (Eds.). Hybrid 2020 Materials and Structures, 28. – 29. April 2020, Karlsruhe, Germany. DGM - Deutsche Gesellschaft für Materialkunde e.V., Sankt Augustin, 33-39
PDF | BibTeX | RIS

Dominik Horny, Joél Pascal Schukraft, Kay A. Weidenmann and Katrin Schulz. 2020. Numerical and experimental characterization of elastic properties of a novel, highly homogeneous interpenetrating metal ceramic composite. Advanced Engineering Materials 22, 7, 1901556. DOI: 10.1002/adem.201901556
PDF | BibTeX | RIS | DOI

Alexander Jackstadt, Wilfried V. Liebig, Vincent Sessner, Kay A. Weidenmann and Luise Kärger. 2019. Application of a mixed variational higher order plate theory towards understanding the deformation behavior of hybrid laminates. PAMM 19, 1, e201900048. DOI: 10.1002/pamm.201900048
PDF | BibTeX | RIS | DOI

Miriam Bartkowiak, Hannes Weit, John Montesano and Kay A. Weidenmann. 2019. Characterization of discontinuous fiber reinforced sheet molding compounds under tension-tension fatigue load. In Kyriaki Kalaitzidou (Ed.). American Society for Composites 2019 - 34th Technical Conference on Composite Materials, September 23─25, 2019, Atlanta, GA, USA. DEStech Publications, Lancaster, PA DOI: 10.12783/asc34/31319
BibTeX | RIS | DOI

Miriam Bartkowiak, Ludwig Schoettl, Peter Elsner and Kay A. Weidenmann. 2019. Combined in situ x-ray computed tomography and acoustic emission analysis for composite characterization - a feasibility study. Key Engineering Materials 809, 604-609. DOI: 10.4028/www.scientific.net/kem.809.604
BibTeX | RIS | DOI

Johannes Görthofer, Nils Meyer, Ludwig Schöttl, Anna Trauth, Malte Schemmann, Pascal Pinter, Benedikt Fengler, Sergej Ilinzeer, Martin Hohberg, Tarkes Dora Pallicity, Luise Kärger, Kay A. Weidenmann, Peter Elsner, Frank Henning, Andrew Hrymak and Thomas Böhlke. 2019. Compression molding of the demonstrator structure. In Thomas Böhlke, Frank Henning, Andrew Hrymak, Luise Kärger, Kay A. Weidenmann and Jeffrey T. Wood (Ed.). Continuous-discontinuous fiber-reinforced polymers: an integrated engineering approach. Carl Hanser Verlag, München (Progress in Polymer Processing (PPP)), 297-314. DOI: 10.3139/9781569906934.006
BibTeX | RIS | DOI

Thomas Böhlke, Frank Henning, Andrew N. Hrymak, Luise Kärger, Kay A. Weidenmann and Jeffrey T. Wood (Ed.). 2019. Continuous-discontinuous fiber-reinforced polymers: an integrated engineering approach. Carl Hanser Verlag, München (Progress in Polymer Processing (PPP)). DOI: 10.3139/9781569906934
BibTeX | RIS | DOI

Vincent Sessner, Alexander Jackstadt, Wilfried V. Liebig, Luise Kärger and Kay A. Weidenmann. 2019. Damping characterization of hybrid carbon fiber elastomer metal laminates using experimental and numerical dynamic mechanical analysis. Journal of Composites Science 3, 1, 3. DOI: 10.3390/jcs3010003
PDF | BibTeX | RIS | DOI

M. Schäferling, B. Häfner, G. Lanza, Anna Trauth, Kay A. Weidenmann and M. Thompson. 2019. Effects of defects in hybrid sheet moulding compound – evaluation of defects and the impact on mechanical properties. Materialwissenschaft und Werkstofftechnik 50, 11, 1317-1325. DOI: 10.1002/mawe.201800139
BibTeX | RIS | DOI

Jonas Huether, Daniel Esse, Peter Rupp, Michael Seitz and Kay A. Weidenmann. 2019. Enhanced strain and stiffness evaluation of virgin and recycled single carbon fibres by means of one-dimensional digital image correlation. Measurement Science and Technology 30, 3, 035201. DOI: 10.1088/1361-6501/aafcad
BibTeX | RIS | DOI

Peter Rupp, Peter Elsner and Kay A. Weidenmann. 2019. Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process. Journal of Sandwich Structures and Materials 21, 8, 2654-2679. DOI: 10.1177/1099636217722052
BibTeX | RIS | DOI

Wilfried V. Liebig, Alexander Jackstadt, Vincent Sessner, Kay A. Weidenmann and Luise Kärger. 2019. Frequency domain modelling of transversely isotropic viscoelastic fibre-reinforced plastics. Composites Science and Technology 180, 101-110. DOI: 10.1016/j.compscitech.2019.04.019
BibTeX | RIS | DOI

Siddhartha Roy, Jens Gibmeier, Karl Günter Schell, Ethel Claudia Bucharsky, Kay A. Weidenmann, Alexander Wanner and Michael J. Hoffmann. 2019. Internal load transfer in an interpenetrating metal/ceramic composite material studied using energy dispersive synchrotron X-ray diffraction. Materials Science and Engineering: A 753, 247-252. DOI: 10.1016/j.msea.2019.03.049
BibTeX | RIS | DOI

Thomas Böhlke, Andrew Hrymak, Luise Kärger, Tarkes Dora Pallicity, Kay A. Weidenmann and Jeffrey T. Wood. 2019. Introduction to continuous–discontinuous fiber-reinforced polymer composites. In Thomas Böhlke, Andrew Hrymak, Luise Kärger, Tarkes Dora Pallicity, Kay A. Weidenmann and Jeffrey T. Wood (Ed.). Continuous-discontinuous fiber-reinforced polymers: an integrated engineering approach. Carl Hanser Verlag, München, 1-10. DOI: 10.3139/9781569906934.001
BibTeX | RIS | DOI

M. Muth, A. Kohlund, S. Buch and Kay A. Weidenmann. 2019. Investigation of the influence of mechanical predamage and deformation rate on the mechanical properties of CFRP/metal hybrid profiles. In ICCM22 2019 - 22nd International Conference on Composites Materials, Melbourne, Australia, August 11-16, 2019. Engineers Australia, Melbourne, VIC, 2804-2814
BibTeX | RIS | URL

Anna Trauth, William Altenhof and Kay A. Weidenmann. 2019. Mechanical characterization of hybrid continuous-discontinuous glass/carbon fiber sheet molding compound composites. In Thomas Böhlke, Frank Henning, Andrew N. Hrymak, Luise Kärger, Kay A. Weidenmann and Jeffrey T. Wood (Ed.). Continuous-discontinuous fiber-reinforced polymers: an integrated engineering approach. Carl Hanser Verlag, München (Progress in Polymer Processing (PPP)), 134-147. DOI: 10.3139/9781569906934.003
BibTeX | RIS | DOI

Christoph Lohr, Björn Beck, Frank Henning, Kay A. Weidenmann and Peter Elsner. 2019. Mechanical properties of foamed long glass fiber reinforced polyphenylene sulfide integral sandwich structures manufactured by direct thermoplastic foam injection molding. Composite Structures 220, 371-385. DOI: 10.1016/j.compstruct.2019.03.056
BibTeX | RIS | DOI

Pascal Pinter, Kay A. Weidenmann and Peter Elsner. 2019. Microstructure characterization. In Thomas Böhlke, Frank Henning, Andrew Hrymak, Luise Kärger, Kay A. Weidenmann and Jeffrey T. Wood (Ed.). Continuous-discontinuous fiber-reinforced polymers: an integrated engineering approach. Carl Hanser Verlag, München, 119-133. DOI: 10.3139/9781569906934.003
BibTeX | RIS | DOI

Johannes Görthofer, Nils Meyer, Tarkes Dora Pallicity, Ludwig Schöttl, Anna Trauth, Malte Schemmann, Martin Hohberg, Pascal Pinter, Peter Elsner, Frank Henning, Andrew Hrymak, Thomas Seelig, Kay A. Weidenmann, Luise Kärger and Thomas Böhlke. 2019. Motivating the development of a virtual process chain for sheet molding compound composites. PAMM 19, 1, e201900124. DOI: 10.1002/pamm.201900124
PDF | BibTeX | RIS | DOI

Siddhartha Roy, Karl Günter Schell, Ethel Claudia Bucharsky, Kay A. Weidenmann, Alexander Wanner and Michael J. Hoffmann. 2019. Processing and characterization of elastic and thermal expansion behaviour of interpenetrating Al12Si/alumina composites. Materials Science and Engineering: A 743, 339-348. DOI: 10.1016/j.msea.2018.11.100
BibTeX | RIS | DOI

Anna Trauth, Kay A. Weidenmann and W. Altenhof. 2019. Puncture properties of a hybrid continuous-discontinuous sheet moulding compound for structural applications. Composites Part B: Engineering 158, 46-54. DOI: 10.1016/j.compositesb.2018.09.035
BibTeX | RIS | DOI

Matthias M. Stoll, Vincent Sessner, Manuel Kramar, Jakob Technau and Kay A. Weidenmann. 2019. The effect of an elastomer interlayer thickness variation on the mechanical properties of Fiber-Metal-Laminates. Composite Structures 219, 90-96. DOI: 10.1016/j.compstruct.2019.03.042
BibTeX | RIS | DOI

C. Dahnke, A. Reeb, F. Pottmeyer, Kay A. Weidenmann and A. E. Tekkaya. 2019. Thermomechanical behavior of shape memory alloy metal matrix composite actuator manufactured by composite extrusion. Smart Materials and Structures 28, 5, 055022. DOI: 10.1088/1361-665x/ab0ef5
PDF | BibTeX | RIS | DOI

Johannes Görthofer, Nils Meyer, Tarkes Dora Pallicity, Ludwig Schöttl, Anna Trauth, Malte Schemmann, Martin Hohberg, Pascal Pinter, Peter Elsner, Frank Henning, Andrew Hrymak, Thomas Seelig, Kay A. Weidenmann, Luise Kärger and Thomas Böhlke. 2019. Virtual process chain of sheet molding compound: development, validation and perspectives. Composites Part B: Engineering 169, 133-147. DOI: 10.1016/j.compositesb.2019.04.001
BibTeX | RIS | DOI

Jonas Huether, Peter Rupp, Ina Kohlschreiber and Kay A. Weidenmann. 2018. An enhanced method to determine the Young’s modulus of technical single fibres by means of high resolution digital image correlation. Measurement Science and Technology 29, 4, 045601. DOI: 10.1088/1361-6501/aaa0bb
BibTeX | RIS | DOI

P. Pinter, S. Dietrich, B. Bertram, L. Kehrer, P. Elsner and Kay A. Weidenmann. 2018. Comparison and error estimation of 3D fibre orientation analysis of computed tomography image data for fibre reinforced composites. NDT & E International 95, 26-35. DOI: 10.1016/j.ndteint.2018.01.001
BibTeX | RIS | DOI

Miriam I. Lautenschläger, Lukas Mayer, Julian Gebauer, Kay A. Weidenmann, Frank Henning and Peter Elsner. 2018. Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound. Composite Structures 203, 960-967. DOI: 10.1016/j.compstruct.2017.09.100
BibTeX | RIS | DOI

Anna Trauth, A. Schubert, D. Bücheler and Kay A. Weidenmann. 2018. Component testing of continuously-discontinuously reinforced hybrid sheet moulding compounds (CoDico SMC). In Joachim M. Hausmann, Marc Siebert, Axel von Hehl (Eds.). Proceedings: 3. Internationale Konferenz - Hybrid Materials and Structures, 18.-19. April 2018, Bremen. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 96-103
BibTeX | RIS

Anna Trauth and Kay A. Weidenmann. 2018. Continuous-discontinuous sheet moulding compounds – effect of hybridisation on mechanical material properties. Composite Structures 202, 1087-1098. DOI: 10.1016/j.compstruct.2018.05.048
BibTeX | RIS | DOI

Alexander Herwig, Peter Horst, Carsten Schmidt, Florentin Pottmeyer and Kay A. Weidenmann. 2018. Design and mechanical characterisation of a layer wise build AFP insert in comparison to a conventional solution. Production Engineering 12, 2, 121-130. DOI: 10.1007/s11740-018-0815-2
BibTeX | RIS | DOI

Thomas Mennecart, Henrik Werner, Nooman Ben Khalifa and Kay A. Weidenmann. 2018. Developments and analyses of alternative processes for the manufacturing of fiber metal laminates. In ASME 2018 13th International Manufacturing Science and Engineering Conference, June 18–22, 2018, College Station, Texas, USA; Volume 2: Materials; Joint MSEC-NAMRC-Manufacturing USA. American Society of Mechanical Engineers, New York, NY, MSEC2018-6447. DOI: 10.1115/msec2018-6447
BibTeX | RIS | DOI

Alexander Wanner and Kay A. Weidenmann. 2018. Die Welt der Werkstoffe – der Grundbaukasten des Maschinenbaus. In Werner Skolaut (Ed.). Maschinenbau: ein Lehrbuch für das ganze Bachelor-Studium. Springer, Berlin, 345-367. DOI: 10.1007/978-3-662-55882-9_14
BibTeX | RIS | DOI

Trevor Sabiston, Pascal Pinter, Julie Lévesque, Kay A. Weidenmann and Kaan Inal. 2018. Evaluating the number of fibre orientations required in homogenization schemes to predict the elastic response of long fibre sheet moulding compound composites from X-ray computed tomography measured fibre orientation distributions. Composites Part A: Applied Science and Manufacturing 114, 278-294. DOI: 10.1016/j.compositesa.2018.08.032
BibTeX | RIS | DOI

Vincent Sessner, Wilfried V. Liebig, Luise Kärger and Kay A. Weidenmann. 2018. Experimental and numerical characterisation of fibre‐metal‐elastomer laminates by using DMA regarding its damping behaviour. PAMM 18, 1, e201800432. DOI: 10.1002/pamm.201800432
BibTeX | RIS | DOI

V. Sessner, W. Liebig, L. Kräger and Kay A. Weidenmann. 2018. Experimental and numerical investigations on the deformation behavior of fiber-metal-elastomer laminates in 3-point Bending Experiments using digital image correlation. In Joachim M. Hausmann, Marc Siebert, Axel von Hehl (Eds.). Proceedings: 3. Internationale Konferenz - Hybrid Materials and Structures, 18.-19. April 2018, Bremen. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 81-87
BibTeX | RIS

Matthias M. Stoll and Kay A. Weidenmann. 2018. Fatigue of fiber-metal-laminates with aluminum core, CFRP face sheets and elastomer interlayers (FMEL). International Journal of Fatigue 107, 110-118. DOI: 10.1016/j.ijfatigue.2017.10.017
BibTeX | RIS | DOI

W. Liebig, V. Sessner, A. Jackstadt, Kay A. Weidenmann and L. Kräger. 2018. Hybrid CFRP-elastomer-metal laminates: influence of lay-up parameters in its damping behaviour. In 18th European Conference on Composite Materials: ECCM18, 24-28 June 2018, Athens, Greece.
BibTeX | RIS

S. Ilinzeer, P. Rupp and Kay A. Weidenmann. 2018. Influence of corrosion on the mechanical properties of hybrid sandwich structures with CFRP face sheets and aluminum foam core. Composite Structures 202, 142-150. DOI: 10.1016/j.compstruct.2018.01.012
BibTeX | RIS | DOI

F. Pottmeyer, O. Schlegel, Kay A. Weidenmann and Matthias Merzkirch. 2018. Investigation of the damage evolution of metal inserts embedded in carbon fiber reinforced plastic by means of computed tomography and acoustic emission = Untersuchung der Schädigungsentwicklung von in kohlenstofffaserverstärkten Kunststoffen eingebetteten Inserts mittels Computertomographie und Schallem. Materialwissenschaft und Werkstofftechnik 49, 10, 1245-1262. DOI: 10.1002/mawe.201800002
BibTeX | RIS | DOI

Peter Rupp, Jonas Imhoff and Kay A. Weidenmann. 2018. Low-velocity impact properties of sandwich structures with aluminum foam cores and CFRP face sheets. Journal of Composites Science 2, 2, 24. DOI: 10.3390/jcs2020024
PDF | BibTeX | RIS | DOI

Anna Trauth, M. Bondy, Kay A. Weidenmann and W. Altenhof. 2018. Mechanical properties and damage evolution of a structural sheet molding compound based on a novel two step curing resin system. Materials and Design 143, 224-237. DOI: 10.1016/j.matdes.2018.02.002
BibTeX | RIS | DOI

Pascal Pinter, Stefan Baumann, Christoph Lohr, Anselm Heuer, Lars Englert and Kay A. Weidenmann. 2018. Mechanical properties of additively manufactured polymer samples using a Piezo controlled injection molding unit and fused filament fabrication compared with a conventional injection molding process. In David L. Bourell, Joseph J. Beaman, Richard H. Crawford, Scott Fish and Carolyn C. Seepersad (Ed.). Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Laboratory for Freeform Fabrication ; University of Texas at Austin, Austin, TX, 2219-2227.
PDF | BibTeX | RIS | URL | URL

Markus Muth, Jan Schwennen, Alexander Bernath, Julian Seuffert, Kay A. Weidenmann, Jürgen Fleischer and Frank Henning. 2018. Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP. Production Engineering 12, 2, 141-152. DOI: 10.1007/s11740-018-0829-9
BibTeX | RIS | DOI

Wilfried V. Liebig, Vincent Sessner, Kay A. Weidenmann and Luise Kärger. 2018. Numerical and experimental investigations of the damping behaviour of hybrid CFRP-elastomer-metal laminates. Composite Structures 202, 1109-1113. DOI: 10.1016/j.compstruct.2018.05.051
BibTeX | RIS | DOI

Christoph Lohr, Björn Beck, Frank Henning, Kay A. Weidenmann and Peter Elsner. 2018. Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology. Journal of Reinforced Plastics and Composites 37, 15, 1020-1034. DOI: 10.1177/0731684418777120
BibTeX | RIS | DOI

Kay A. Weidenmann, H. Kerrmann, A. Dennard, A. Roch, Christoph Lohr and P. Elsner. 2018. Process effects on the properties of a sandwich part manufactured by particle foam injection molding. In Thomas Keller, Sonia Yanes Armas, Leif A. Carlsson, Yeoshua Frostig (Eds.). 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018: Proceedings. EPFL - CCLab Composite Construction Laboratory, Lausanne, 156-158 DOI: 10.5075/epfl-ICSS12-2018-156-158
PDF | BibTeX | RIS | DOI

Christoph Lohr, Stefan Dieterle, Andreas Menrath, Kay A. Weidenmann and Peter Elsner. 2018. Rheological studies on gas-laden and long glass fiber reinforced polypropylene through an inline high pressure capillary rheometer in the injection molding process. Polymer Testing 71, 27-31. DOI: 10.1016/j.polymertesting.2018.08.015
BibTeX | RIS | DOI

Peter Rupp, Peter Elsner and Kay A. Weidenmann. 2018. Small object low-velocity impact damage on hybrid sandwich structures with CFRP face sheets and aluminum foam cores. International Journal of Crashworthiness 23, 6, 697-710. DOI: 10.1080/13588265.2018.1489338
BibTeX | RIS | DOI

J. Huether, P. Schumann and Kay A. Weidenmann. 2018. Spent coffee ground as filler for fibre reinforced composites manufactured in a direct bulk moulding compound process. In 18th European Conference on Composite Materials: ECCM18, 24-28 June 2018, Athens, Greece.
BibTeX | RIS

Jonathan Tham, Trevor Sabiston, Anna Trauth, Julie Lévesque, Kay A. Weidenmann and Kaan Inal. 2018. The effect of tension compression asymmetry on modelling the bending response of sheet moulding compound composites. Composites Part B: Engineering 154, 157-165. DOI: 10.1016/j.compositesb.2018.07.058
BibTeX | RIS | DOI

M. Muth and Kay A. Weidenmann. 2018. Three point bending test on CFRP-steel profile hybrid structures. In Joachim M. Hausmann, Marc Siebert, Axel von Hehl (Eds.). Proceedings: 3. Internationale Konferenz - Hybrid Materials and Structures, 18.-19. April 2018, Bremen. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 74-80
BibTeX | RIS

Kay A. Weidenmann, Benedikt Haspel and Lisa Baumgärtner. 2018. Vorrichtung und ein Verfahren zur Bestimmung der Scherfestigkeit und des Schermoduls von Verbundwerkstoffen.
BibTeX | RIS

O. Saburow, J. Huether, R. Maertens, Anna Trauth, Y. Kechaou, F. Henning and Kay A. Weidenmann. 2017. A direct process to reuse dry fiber production waste for recycled carbon fiber bulk molding compounds. Procedia CIRP 66, 265-270. DOI: 10.1016/j.procir.2017.03.280
PDF | BibTeX | RIS | DOI

Jonas Huether, Robert Maertens, Oleg Saburow, Elisa Seiler, Theresa Aicher and Kay A. Weidenmann. 2017. A holistic approach to use multi-scale fractions of dry carbon fibre production waste in filled Bulk Moulding Compounds (BMC). Key Engineering Materials 742, 583-592. DOI: 10.4028/www.scientific.net/kem.742.583
BibTeX | RIS | DOI

Anna Trauth, Pascal Pinter and Kay A. Weidenmann. 2017. Acoustic emission analysis during bending tests of continuous and discontinuous fiber reinforced polymers to be used in hybrid sheet molding compounds. Key Engineering Materials 742, 644-651. DOI: 10.4028/www.scientific.net/kem.742.644
BibTeX | RIS | DOI

Anselm Heuer, Pascal Pinter and Kay A. Weidenmann. 2017. Analysis of the effects of raster orientation in components consisting of short glass fibre reinforced ABS of different fibre volume fraction produced by additive manufacturing. Key Engineering Materials 742, 482-489. DOI: 10.4028/www.scientific.net/kem.742.482
BibTeX | RIS | DOI

H. Werner, I. Sönmez, Rainer Wendl, Kay A. Weidenmann and Fank Henning. 2017. Characterization of the interlaminar shear strength of fiber metal laminates with reactively processed thermoplastic matrix. In SAMPE Europe Conference 2017, 14th - 16th November 2017, Leinfelden-Echterdingen, Germany.
BibTeX | RIS

Michael Seitz, Andreas Reeb, Armin Klumpp and Kay A. Weidenmann. 2017. Composite peening - a novel processing technology for graded reinforced aluminium matrix composites. Key Engineering Materials 742, 137-144. DOI: 10.4028/www.scientific.net/KEM.742.137
BibTeX | RIS | DOI | URL

F. Pottermyer, M. Muth and Kay A. Weidenmann. 2017. Damage behavior of inserts embedded in carbon fiber reinforced plastics under near-service loads. In SAMPE Europe Conference 2017, 14th - 16th November 2017, Leinfelden-Echterdingen, Germany.
BibTeX | RIS

D. Treber, B. Haspel, P. Elsner and Kay A. Weidenmann. 2017. Delamination fracture toughness of continuous glass-fiber/epoxy composites for structural applications. International Journal of Plastics Technology 21, 1, 39-54. DOI: 10.1007/s12588-016-9168-x
BibTeX | RIS | DOI

Vincent Sessner, Matthias Stoll, Arnaud Feuvrier and Kay A. Weidenmann. 2017. Determination of the damping characteristics of fiber-metal-elastomer laminates using Piezo-indicated-loss-factor experiments. Key Engineering Materials 742, 325-332. DOI: 10.4028/www.scientific.net/kem.742.325
BibTeX | RIS | DOI

Klaudia Lichtenberg and Kay A. Weidenmann. 2017. Effect of reinforcement size and orientation on the thermal expansion behavior of metallic glass reinforced metal matrix composites produced by gas pressure infiltration. Thermochimica Acta 654, 85-92. DOI: 10.1016/j.tca.2017.05.010
BibTeX | RIS | DOI

D. Hummelberger, L. Kärger, Kay A. Weidenmann, J. Staeves and F. Henning. 2017. Evaluation of the physical mechanisms of adhesively bonded metal-based hybrid material systems under tensile loading. Materials and Design 132, 215-224. DOI: 10.1016/j.matdes.2017.07.001
BibTeX | RIS | DOI

F. Pottmeyer, J. Bittner, P. Pinter and Kay A. Weidenmann. 2017. In-situ CT damage analysis of metal inserts embedded in carbon fiber-reinforced plastics. Experimental Mechanics 57, 9, 1411-1422. DOI: 10.1007/s11340-017-0312-0
BibTeX | RIS | DOI

A. Reeb and Kay A. Weidenmann. 2017. Influence of heat treatment on microstructure and mechanical properties of the interface in an EN AW-6082/1.4310 composite extrusion. Composite Interfaces 24, 8, 779-800. DOI: 10.1080/09276440.2017.1274625
BibTeX | RIS | DOI

Klaudia Lichtenberg, Eric Orsolani-Uhlig, Ralf Roessler and Kay A. Weidenmann. 2017. Influence of heat treatment on the properties of AlSi10Mg-based metal matrix composites reinforced with metallic glass flakes processed by gas pressure infiltration. Journal of Composite Materials 51, 30, 4165-4175. DOI: 10.1177/0021998317699867
BibTeX | RIS | DOI

Christoph Lohr, Andreas Menrath, Peter Elsner and Kay A. Weidenmann. 2017. Influence of the manufacturing process (comparison MuCell and direct-LFT) of foamed and fiber reinforced polymer sandwich structures on the fiber length. Key Engineering Materials 742, 38-45. DOI: 10.4028/www.scientific.net/kem.742.38
BibTeX | RIS | DOI

Anna Trauth, Pascal Pinter and Kay A. Weidenmann. 2017. Investigation of quasi-static and dynamic material properties of a structural sheet molding compound combined with acoustic emission damage analysis. Journal of Composites Science 1, 2, 18. DOI: 10.3390/jcs1020018
PDF | BibTeX | RIS | DOI

F. Behnisch, P. Rosenberg, Kay A. Weidenmann and F. Henning. 2017. Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process. AIP Conference Proceedings 1914, 180003. DOI: 10.1063/1.5016789
PDF | BibTeX | RIS | DOI

Peter Rupp, Peter Elsner and Kay A. Weidenmann. 2017. Material selection for CFRP-aluminium-foam-sandwiches manufactured by a PUR spraying process. Key Engineering Materials 742, 317-324. DOI: 10.4028/www.scientific.net/kem.742.317
BibTeX | RIS | DOI

Matthias Stoll and Kay A. Weidenmann. 2017. Materials selection of a Fiber-Metal-Laminate with elastomer interlayers. In Shanyi Du, Jinsong Leng (Eds.). Proceedings: 21st International Conference on Composite Materials, August 20-25, 2017, Xi'an, China. Chinese Society for Composite Materials, Beijing, 3795
BibTeX | RIS | URL

Klaudia Lichtenberg and Kay A. Weidenmann. 2017. Mechanical properties of AlSi12-based metal matrix composites with layered metallic glass ribbons. Key Engineering Materials 742, 181-188. DOI: 10.4028/www.scientific.net/kem.742.181
BibTeX | RIS | DOI

Matthias Stoll, Franziska Stemmer, Sergej Ilinzeer and Kay A. Weidenmann. 2017. Optimization of corrosive properties of carbon fiber reinforced aluminum laminates due to integration of an elastomer interlayer. Key Engineering Materials 742, 287-293. DOI: 10.4028/www.scientific.net/kem.742.287
BibTeX | RIS | DOI

Florentin Pottmeyer, Markus Muth and Kay A. Weidenmann. 2017. Research of the load bearing capacity of shape-optimized metal inserts embedded in CFRP under different types of stresses. Key Engineering Materials 742, 636-643. DOI: 10.4028/www.scientific.net/kem.742.636
BibTeX | RIS | DOI

Kay A. Weidenmann, Stefan Dietrich, Manfred Grigo and Peter Elsner. 2017. Rigidity and damage evolution of long fibre reinforced polypropylene made by direct processing route (LFT-D). Key Engineering Materials 742, 3-8. DOI: 10.4028/www.scientific.net/kem.742.3
BibTeX | RIS | DOI

Peter Rupp, Peter Elsner and Kay A. Weidenmann. 2017. Specific bending stiffness of in-mould-assembled hybrid sandwich structures with carbon fibre reinforced polymer face sheets and aluminium foam cores manufactured by a polyurethane-spraying process. Journal of Sandwich Structures & Materials 21, 8, 2779-2800. DOI: 10.1177/1099636217725250
BibTeX | RIS | DOI

Pascal Pinter, Benjamin Bertram and Kay A. Weidenmann. 2016. A novel method for the determination of fibre length distributions from µCT-data. In 6th Conference on Industrial Computed Tomography (iCT) 2016, 9-12 February 2016, Wels, Austria (iCT 2016). NDT.net
BibTeX | RIS | URL

Pascal Pinter, Stefan Dietrich and Kay A. Weidenmann. 2016. Algorithms for the determination of curvature from 3D µ-CT images – a comparison. In Joachim M. Hausmann, Marc Siebert (Eds.). 2. Internationale Konferenz Euro Hybrid - Materials and Structure, 20.-21. April 2016, Kaiserslautern: Proceedings. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 50-56
BibTeX | RIS

Kay A. Weidenmann, S. Baumann, P. Pinter and P. Elsner. 2016. Analysis of fiber orientation, microstructure and mechanical properties of specimens made from fiber-reinforced ABS manufactured by fused filament fabrication. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

F.J. Schirmaier, Kay A. Weidenmann, L. Kärger and F. Henning. 2016. Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF). Composites Part A: Applied Science and Manufacturing 80, 28-38. DOI: 10.1016/j.compositesa.2015.10.004
BibTeX | RIS | DOI

A. Reeb, V. Walter, V. Schulze and Kay A. Weidenmann. 2016. Characterization of a hybrid Al2O3–aluminum matrix composite manufactured via composite extrusion. Journal of Composite Materials 50, 8, 1099-1108. DOI: 10.1177/0021998315587317
BibTeX | RIS | DOI

Matthias Stoll and Kay A. Weidenmann. 2016. Characterization of interface properties of Fiber-Metal-Laminates (FML) with optimized surfaces. In Joachim M. Hausmann, Marc Siebert (Eds.). 2. Internationale Konferenz Euro Hybrid - Materials and Structure, 20.-21. April 2016, Kaiserslautern: Proceedings. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 38-43
BibTeX | RIS

M. Schöbel, P. Dobron, J. Bernardi, R. Wimpory and Kay A. Weidenmann. 2016. Elasto-plastic deformation within diamond reinforced metals for thermal management. Diamond and Related Materials 70, 52-58. DOI: 10.1016/j.diamond.2016.09.027
BibTeX | RIS | DOI

Andreas Reeb, Matthias Merzkirch, Volker Schulze and Kay A. Weidenmann. 2016. Heat treatment during composite extruded spring steel wire reinforced EN AW-6082. Journal of Materials Processing Technology 229, 1-8. DOI: 10.1016/j.jmatprotec.2015.08.022
BibTeX | RIS | DOI

S. Gödde, C. Arik, Kay A. Weidenmann and F. Henning. 2016. Manufacturing of thermoplastic Fiber-Metal-Laminates based on reactively processed polyamide 6. In Joachim M. Hausmann, Marc Siebert (Eds.). 2. Internationale Konferenz Euro Hybrid - Materials and Structure, 20.-21. April 2016, Kaiserslautern: Proceedings. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 157-161
BibTeX | RIS

A. Reeb, A. Wanner and Kay A. Weidenmann. 2016. Mechanical characterization and damage evolution of a Cu/SiC – interpenetrating metal matrix composite manufactured by a squeeze-cast infiltration method. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

Jonas Huether, Ina Kohlschreiber, Matthias Stoll and Kay A. Weidenmann. 2016. Mechanical characterization of juvenile and recycled carbon fibers using single fiber tensile tests. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

Anna Trauth, D. Bücheler and Kay A. Weidenmann. 2016. Mechanical properties of continuously-discontinuously hybrid sheet molding compounds. In Joachim M. Hausmann, Marc Siebert (Eds.). 2. Internationale Konferenz Euro Hybrid - Materials and Structure, 20.-21. April 2016, Kaiserslautern: Proceedings. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin, 57-62
BibTeX | RIS

Grigorév Peiyu, David Bücheler, Frank Henning and Kay A. Weidenmann. 2016. Mechanical properties of unidirectional continuous carbon fiber sheet molding compounds. In 17th European Conference on Composite Materials, ECCM 2016, Proceedings: 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

B. Bertram, P. Pinter and Kay A. Weidenmann. 2016. Non-destructive determination of the local fiber volume content in flat AL(OH)3-filled SMC parts from X-ray projections. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

Christoph Lohr, A. Menrath, P. Elsner and Kay A. Weidenmann. 2016. Process and mold development of direct long fiber reinforced foam injection molding on the example of polycarbonate and glass fibers. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

Anna Trauth, D. Bücheler, F. Henning and Kay A. Weidenmann. 2016. Properties of unidirectional continuous carbon fiber sheet molding compounds. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

J. Wilkening, F. Pottmeyer and Kay A. Weidenmann. 2016. Research on the interfering effect of metal inserts in carbon fiber reinforced plastics manufactured by the RTM process. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

Carolin Zinn, Mirko Schaper, Jonathan Serna Gonzalez, Dieter Meiners, Zheng Wang, Thomas Troester, Florentin Pottmeyer and Kay A. Weidenmann. 2016. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites 2, 3/4, 244-271. DOI: 10.1504/ijautoc.2016.084321
BibTeX | RIS | DOI

Matthias Stoll and Kay A. Weidenmann. 2016. The impact of environmental stress on the mechanical behavior of Fiber-Metal-Laminates with elastomer interlayers (FMEL). In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

P. Rupp, F. Wafzig and Kay A. Weidenmann. 2016. The interface of CFRP face sheets and aluminum foam cores in hybrid sandwich panels manufactured by a PUR spraying process. In Proceedings of the 17th European Conference on Composite Materials ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. MAI Carbon Cluster Management, Augsburg
BibTeX | RIS

A. Diez, K. Klink, M. Mayer, T. Schwalb and Kay A. Weidenmann. 2016. Vom Teilnehmer zum Partner – wie kann es nach der hochschuldidaktischen Weiterbildung weiter gehen?. P-OE – Personal und Organisationsentwicklung 2016, 1, 9-13.
BibTeX | RIS | URL | URL

Pascal Pinter, Stefan Dietrich and Kay A. Weidenmann. 2015. Algorithms for the determination of orientation-tensors from three dimensional µCT images with various microstructures. In Ole Thybo Thomsen, Christian Berggreen, Bent F. Sørensen (Eds.). Proceedings: 20th International Conference on Composite Materials, July 19-24, 2015, Copenhagen, Denmark. Aalborg University, Aalborg, 2213-2
BibTeX | RIS | URL

A. Morasch, A. Reeb, H. Baier, Kay A. Weidenmann and V. Schulze. 2015. Characterization of debonding strength in steel-wire-reinforced aluminum and its influence on material fracture. Engineering Fracture Mechanics 141, 242-259. DOI: 10.1016/j.engfracmech.2015.05.029
BibTeX | RIS | DOI

Johannes Gebhardt, Florentin Pottmeyer, Jürgen Fleischer and Kay A. Weidenmann. 2015. Characterization of metal inserts embedded in carbon fiber reinforced plastics. Materials Science Forum 825-826, 506-513. DOI: 10.4028/www.scientific.net/msf.825-826.506
BibTeX | RIS | DOI

B. Haspel, C. Hoffmann, P. Elsner and Kay A. Weidenmann. 2015. Characterization of the interfacial shear strength of glass-fiber reinforced polymers made from novel RTM processes. International Journal of Plastics Technology 19, 2, 333-346. DOI: 10.1007/s12588-015-9122-3
BibTeX | RIS | DOI

K. Schulz, K. Lichtenberg and Kay A. Weidenmann. 2015. Discussion of the evolution of micro cracks by characterization and modeling of metal matrix composites reinforced by metallic glass particles. In Ole Thybo Thomsen, Christian Berggreen, Bent F. Sørensen (Eds.). Proceedings: 20th International Conference on Composite Materials, July 19-24, 2015, Copenhagen, Denmark. Aalborg University, Aalborg, P103-16
BibTeX | RIS | URL

Matthias Merzkirch, Yuri Sinchuk, Kay A. Weidenmann and Roman Piat. 2015. Experimental and numerical determination of the elastic moduli of freeze cast MMC with different lamellae orientation. In Waltraud M. Kriven, Jingyang Wang, Dongming Zhu, Thomas Fischer (Eds.). Developments in Strategic Ceramic Materials: a collection of papers presented at the 39th International Conference on Advanced Ceramics and Composites. Wiley, Hoboken, NJ, 153-166 DOI: 10.1002/9781119211747.ch13
BibTeX | RIS | DOI

Matthias Merzkirch, Thilo Hammers, Andreas Reeb, Thomas Schwind, Sascha Riedl, Leon Thiel, Alexander Henschel, Eberhard Kerscher, Volker Schulze and Kay A. Weidenmann. 2015. Fatigue behavior and lifetime prediction of unidirectionally wire reinforced lightweight metal matrix composites. Advanced Engineering Materials 17, 6, 905-911. DOI: 10.1002/adem.201400354
BibTeX | RIS | DOI

Klaudia Lichtenberg and Kay A. Weidenmann. 2015. Innovative aluminum based metallic glass particle reinforced MMCs produced by gas pressure infiltration. Materials Science Forum 825-826, 101-108. DOI: 10.4028/www.scientific.net/msf.825-826.101
BibTeX | RIS | DOI

Andreas Reeb, Volker Schulze and Kay A. Weidenmann. 2015. Interface characterization of hybrid composite extrusions. Materials Science Forum 825-826, 134-141. DOI: 10.4028/www.scientific.net/msf.825-826.134
BibTeX | RIS | DOI

Matthias Merzkirch, Pascal Pinter, Stefan Dietrich and Kay A. Weidenmann. 2015. Interpenetrating freeze cast composites: correlation between structural and mechanical characteristics. Materials Science Forum 825-826, 109-116. DOI: 10.4028/www.scientific.net/msf.825-826.109
BibTeX | RIS | DOI

Christian Weddeling, Volker Walter, Peter Haupt, A. Erman Tekkaya, Volker Schulze and Kay A. Weidenmann. 2015. Joining zone design for electromagnetically crimped connections. Journal of Materials Processing Technology 225, 240-261. DOI: 10.1016/j.jmatprotec.2015.06.009
BibTeX | RIS | DOI

Yuriy Sinchuk, Stefan Dietrich, Matthias Merzkirch, Kay A. Weidenmann and Romana Piat. 2015. Micro-computed tomography image based numerical elastic homogenization of MMCs. Key Engineering Materials 627, 437-440. DOI: 10.4028/www.scientific.net/kem.627.437
BibTeX | RIS | DOI

Sascha Fliegener, Jörg Hohe, B. Haspel and Kay A. Weidenmann. 2015. Micromechanical modeling of the nonlinear deformation of LFTs under consideration of the effects of interface damage. In Ole Thybo Thomsen, Christian Berggreen, Bent F. Sørensen (Eds.). Proceedings: 20th International Conference on Composite Materials, July 19-24, 2015, Copenhagen, Denmark. Aalborg University, Aalborg, 3115-3
BibTeX | RIS | URL

Matthias Merzkirch, Marius Meissner, Volker Schulze and Kay A. Weidenmann. 2015. Numerical analysis to study the tensile behaviour of a spring-steel-wire-reinforced aluminium alloy metal matrix composite. Journal of Composite Materials 49, 21, 2659-2671. DOI: 10.1177/0021998314553044
BibTeX | RIS | DOI

Volker Walter, Franz Xaver Wirth, Volker Schulze and Kay A. Weidenmann. 2015. Optimization of friction stir welded, spring steel wire reinforced EN AW-6082 profile joints. Materials Science Forum 825-826, 457-464. DOI: 10.4028/www.scientific.net/msf.825-826.457
BibTeX | RIS | DOI

Matthias Merzkirch, Marius Meissner, Volker Schulze and Kay A. Weidenmann. 2015. Tensile behaviour of spring steel wire reinforced EN AW-6082. Journal of Composite Materials 49, 3, 261-274. DOI: 10.1177/0021998313517581
BibTeX | RIS | DOI

Matthias Merzkirch, Volker Walter and Kay A. Weidenmann. 2015. Tensile properties of an infiltrated interpenetrating porous SiC MMC. In Ole Thybo Thomsen, Christian Berggreen, Bent F. Sørensen (Eds.). 20th International Conference on Composite Materials (ICCM 20), July 19-24, 2015, Copenhagen, Denmark. Aalborg University, Aalborg, 4212-5
BibTeX | RIS | URL | URL

Kay A. Weidenmann, Lisa Baumgärtner and Benedikt Haspel. 2015. The edge shear test - an alternative testing method for the determination of the interlaminar shear strength in composite materials. Materials Science Forum 825-826, 806-813. DOI: 10.4028/www.scientific.net/msf.825-826.806
BibTeX | RIS | DOI

Pascal Pinter, Andreas Reeb and Kay A. Weidenmann. 2015. The influence of stress and heat on the transformation behaviour of NiTi for actuator applications in extruded aluminium matrix composites. Materials Science Forum 825-826, 205-212. DOI: 10.4028/www.scientific.net/msf.825-826.205
BibTeX | RIS | DOI

Fabian Buck, Barthel Brylka, Viktor Müller, Timo Müller, Kay A. Weidenmann, Andrew N. Hrymak, Frank Henning and Thomas Böhlke. 2015. Two-scale structural mechanical modeling of long fiber reinforced thermoplastics. Composites Science and Technology 117, 159-167. DOI: 10.1016/j.compscitech.2015.05.020
BibTeX | RIS | DOI

Noomane Ben Khalifa, Ermann A. Tekkaya, Alper Güner, Thomas Mennecart, Andreas Rösner, Kay A. Weidenmann and Frank Henning. 2015. Verfahren zur Herstellung thermoplastischer Faser-Metall-Laminat-Bauteile mittels Umformverfahren sowie entsprechend hergestellte Faser-Metall-Laminat-Bauteile.
BibTeX | RIS

Stefan Dietrich, Kay A. Weidenmann and Peter Elsner. 2014. 3D tomographic characterization of sandwich structures. NDT & E International 62, 77-84. DOI: 10.1016/j.ndteint.2013.12.001
BibTeX | RIS | DOI

V. Walter, Kay A. Weidenmann and V. Schulze. 2014. A comparison of FSW, BHLW and TIG joints for Al-Si-Mg alloy (EN AW-6082 T6). Procedia CIRP 18, 120-125. DOI: 10.1016/j.procir.2014.06.118
PDF | BibTeX | RIS | DOI

A. Reeb, L. Schweizer, Kay A. Weidenmann and V. Schulze. 2014. Characterization of unreinforced and steel wire reinforced magnesium alloy AZ31 under mechanical-corrosive loading. Procedia CIRP 18, 114-119. DOI: 10.1016/j.procir.2014.06.117
PDF | BibTeX | RIS | DOI

Matthias Merzkirch, Andreas Reeb, Volker Schulze and Kay A. Weidenmann. 2014. Cyclic deformation and damage behaviour of the spring steel wire reinforced aluminium alloy EN AW-6082. Journal of Materials Science 49, 5, 2187-2203. DOI: 10.1007/s10853-013-7913-5
BibTeX | RIS | DOI

Siddhartha Roy, Jens Gibmeier, Kay A. Weidenmann, Alwin Nagel and Alexander Wanner. 2014. Effect of phase architecture on mechanical properties of interpenetrating metal/ceramic composites. In Werasak Udomkichdecha, Thomas Böllinghaus, Anchalee Manonukul and Jürgen Lexow (Ed.). Materials Challenges and Testing for Manufacturing, Mobility, Biomedical Applications and Climate. Springer International, Cham, 77-86. DOI: 10.1007/978-3-319-11340-1_8
BibTeX | RIS | DOI

Kay A. Weidenmann. 2014. Heinrich Blanc – tatkräftiger Unternehmer und treuer Waldenser. In Albert de Lange (Ed.). Bewahrung und Erneuerung: Förderer des deutschen Waldensertums; Aufsätze anlässlich des 75-jährigen Bestehens der Deutschen Waldenservereinigung e. V. 2011 und des 75-jährigen Jubiläums der Einweihung des Henri-Arnaud-Hauses in Schönenberg als Museum 2014. Verlag Regionalkultur, Heidelberg (Waldenserstudien ; 5), 165-182.
BibTeX | RIS

S. Roy, J. Gibmeier, V. Kostov, Kay A. Weidenmann, A. Nagel and A. Wanner. 2014. Load partitioning study in a 3D interpenetrating AlSi12/Al2O3 metal matrix composite. In Materials Science Forum. Trans Tech Publications, 103-107 DOI: 10.4028/www.scientific.net/MSF.772.103
BibTeX | RIS | DOI

Matthias Merzkirch, Ch. Blümel, R. Rössler, K. G. Schell, E. C. Bucharsky and Kay A. Weidenmann. 2014. Manufacturing and characterization of interpenetrating SiC lightweight composites. Procedia CIRP 18, 102-107. DOI: 10.1016/j.procir.2014.06.115
PDF | BibTeX | RIS | DOI

S. Dietrich, M. Koch, P. Elsner and Kay A. Weidenmann. 2014. Measurement of sub-surface core damage in sandwich structures using in-situ Hertzian indentation during X-ray computed tomography. Experimental Mechanics 54, 8, 1385-1393. DOI: 10.1007/s11340-014-9902-2
BibTeX | RIS | DOI

Siddhartha Roy, Karl Günter Schell, Ethel Claudia Bucharsky, Kay A. Weidenmann, Alexander Wanner and Michael J. Hoffmann. 2013. Characterization of elastic properties in porous silicon carbide preforms fabricated using polymer waxes as pore formers. Journal of the American Ceramic Society 96, 7, 2269-2275. DOI: 10.1111/jace.12341
BibTeX | RIS | DOI

A. Rösner, L. Kärger, F. Henning and Kay A. Weidenmann. 2013. Charakterisierung des Deformationsverhaltens eines durch Köpergewebe verstärkten Thermoplasten. In Alexander Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband; 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 27-32.
BibTeX | RIS

S. Dietrich, Kay A. Weidenmann and P. Elsner. 2013. Computertomographie in der Charakterisierung von Sandwichverbunden: automatisierte Bildanalyse in Prüfung und Berechnung sinusoidaler Sandwichstrukturen. In A. Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 627-633.
BibTeX | RIS

Siddhartha Roy, Pascal Albrecht, Lars Przybilla, Kay A. Weidenmann, Martin Heilmaier and Alexander Wanner. 2013. Effect of phase architecture on the thermal expansion behavior of interpenetrating metal/ceramic composites. In Narottam P. Bansal, J. P. Singh, Song Won Ko, Ricardo H. R. Castro, Gary Pickrell, Navin Jose Manjooran, K. M. Nair and Gurpreet Singh (Ed.). Processing and Properties of Advanced Ceramics and Composites V. John Wiley and Sons, Hoboken, NJ (Ceramic Transactions ; 240), 33-43. DOI: 10.1002/9781118744109.ch4
BibTeX | RIS | DOI

B. Haspel, Ch. Bruns, Kay A. Weidenmann and P. Elsner. 2013. Ermittlung der mechanischen Eigenschaften von neuartigen RTM-Bauteilen unter Druckbeanspruchung. In Alexander Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband; 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 39-44.
BibTeX | RIS

S. Sanwald, F. Henning, B. Bertram, Kay A. Weidenmann, B. Brylka, V. Müller and Th. Böhlke. 2013. Geschlossene Simulation und experimenteller Vergleich der effektiven Bauteilsteifigkeit unter Berücksichtigung der lokalen Materialeigenschaften einer im Fließpressprozess hergestellten SMC-Sickenstruktur. In Alexander Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband; 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 574-581.
BibTeX | RIS

A. de Lange and Kay A. Weidenmann. 2013. Leben und Wirken des Waldenserschulmeisters Jean Henry Perrot (1798-1853) aus Nordhausen. Zeitschrift des Zabergäuvereins 87, 1-16.
BibTeX | RIS

Matthias Merzkirch, Volker Schulze and Kay A. Weidenmann. 2013. Lifetime behaviour of unidirectionally wire reinforced lightweight metal matrix composites. International Journal of Fatigue 56, 60-68. DOI: 10.1016/j.ijfatigue.2013.08.002
BibTeX | RIS | DOI

Kay A. Weidenmann, J. Berkmann, B. Haspel and P. Elsnter. 2013. Machbarkeitsstudie zum Verbundstrangpressen von seilverstärkten Polymermatrixverbunden. In Alexander Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband; 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 692-697.
BibTeX | RIS

Andreas Reeb, M. Gottschalk, Kay A. Weidenmann and V. Schulze. 2013. Rissausbreitungsverhalten von federstahldrahtverstärktem EN AW-6082 unter mechanisch-korrosiver Beanspruchung. In Alexander Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband; 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 76-82.
BibTeX | RIS

S. Roy, F. Kessler, Kay A. Weidenmann, A. Wanner and A. Nagel. 2013. Thermal expansion behavior of an interpenetrating metal/ceramic composite. In A. Wanner and Kay A. Weidenmann (Ed.). Verbundwerkstoffe: Tagungsband - 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03. - 05. Juli 2013, Stadthalle Karlsruhe. Conventus Congressmanagement & Marketing, Jena, 265-271.
BibTeX | RIS

Bernd Thoma, Kay A. Weidenmann and Frank Henning. 2012. Chemical-Stitching, ein vielversprechender Ansatz für die automatisierte Preform-Fertigung. Zeitschrift Kunststofftechnik 2012, 5, 490-514.
BibTeX | RIS | URL

Bernd Thoma, Kay A. Weidenmann and Frank Henning. 2012. Chemical-stitching as a promising approach for automated preforming of textiles. Journal of Plastics Technology 2012, 5, 490-514.
BibTeX | RIS | URL

Siddhartha Roy, Jens Gibmeier, Vladimir Kostov, Kay A. Weidenmann, Alwin Nagel and Alexander Wanner. 2012. Internal load transfer and damage evolution in a 3D interpenetrating metal/ceramic composite. Materials Science and Engineering: A 551, 272-279. DOI: 10.1016/j.msea.2012.05.016
BibTeX | RIS | DOI

Siddhartha Roy, Jens Gibmeier, Kay A. Weidenmann and Alexander Wanner. 2012. Mechanical properties of innovative metal/ceramic composites based on freeze-cast ceramic preforms. In Thomas Böllinghaus, Jürgen Lexow, Teruo Kishi and Masaki Kitagawa (Ed.). Materials Challenges and Testing for Supply of Energy and Resources. Springer, Berlin, 213-220. DOI: 10.1007/978-3-642-23348-7_19
BibTeX | RIS | DOI

S. Dietrich, J.-M. Gebert, G. Stasiuk, A. Wanner, Kay A. Weidenmann, O. Deutschmann, I. Tsukrov and R. Piat. 2012. Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions. Composites Science and Technology 72, 15, 1892-1900. DOI: 10.1016/j.compscitech.2012.08.009
BibTeX | RIS | DOI

Martin Schwane, Thomas Kloppenborg, Andreas Reeb, Nooman Ben Khalifa, Alexander Brosius, Kay A. Weidenmann and A. Erman Tekkaya. 2012. Numerical approach for the evaluation of seam welding criteria in extrusion processes. Key Engineering Materials 504-506, 517-522. DOI: 10.4028/www.scientific.net/kem.504-506.517
BibTeX | RIS | DOI

A. Reeb, A. Ohl, K. Poser, T. Kloppenborg, A. Brosius, A. E. Tekkaya and Kay A. Weidenmann. 2012. Preparation and etching methods for a light-optical microscopy analysis of extrusion seams and microstructural contrasting for aluminum alloys EN AW-6063 and EN AW-6082. Practical Metallography 49, 10, 612-622. DOI: 10.3139/147.110187
BibTeX | RIS | DOI

Siddhartha Roy, Karl Günter Schell, Ethel Claudia Bucharsky, Pascal Hettich, Stefan Dietrich, Kay A. Weidenmann, Alexander Wanner and Michael J. Hoffmann. 2012. Processing and elastic property characterization of porous SiC preform for interpenetrating metal/ceramic composites. Journal of the American Ceramic Society 95, 10, 3078-3083. DOI: 10.1111/j.1551-2916.2012.05347.x
BibTeX | RIS | DOI

S. Roy, K. G. Schell, C. Bucharsky, P. Hettich, S. Dietrich, Kay A. Weidenmann, A. Wanner and M. J. Hoffmann. 2012. Processing and non-destructive characterisation of porous silicon carbide preforms for metal/ceramic composite fabrication. In Cellular materials proceedings: CELLMAT 2012; 7-9 November 2012, Dresden, Germany. Deutsche Gesellschaft für Materialkunde (DGM), Sankt Augustin
BibTeX | RIS

Kay A. Weidenmann. 2012. Verbundstrangpressen mit modifizierten Kammerwerkzeugen: Werkstofftechnik, Fertigungstechnik, Simulation. KIT Scientific Publishing, Karlsruhe. DOI: 10.5445/KSP/1000029028
PDF | BibTeX | RIS | DOI

Matthias Merzkirch, Andreas Reeb, Kay A. Weidenmann, Alexander Wanner and Volker Schulze. 2011. Acoustic emission response of reinforced lightweight metal matrix composites during tensile and cyclic loading. Journal of Acoustic Emission 29, 317-328.
BibTeX | RIS

Siddhartha Roy, Oliver Stoll, Kay A. Weidenmann, Alwin Nagel and Alexander Wanner. 2011. Analysis of the elastic properties of an interpenetrating AlSi12–Al2O3 composite using ultrasound phase spectroscopy. Composites Science and Technology 71, 7, 962-968. DOI: 10.1016/j.compscitech.2011.02.014
BibTeX | RIS | DOI

B. Haspel, R. Chaudhari, Kay A. Weidenmann, F. Henning and P. Elsner. 2011. Charakterisierung des Compression RTM Prozesses zur Produktion von endlosfaserverstärkten Verbundwerkstoffen. In B. Wielage (Ed.). Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde: in Chemnitz 2011; 30.03. - 01.04.2011. IWW, Chemnitz (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41), 227-232.
BibTeX | RIS

Matthias Merzkirch, A. Reeb, Kay A. Weidenmann and V. Schulze. 2011. Charakterisierung des Verformungs- und Schädigungsverhaltens unidirektional drahtverstärkter Aluminium- und Magnesiummatrixverbunde unter Zug- und Druckbeanspruchung. In B. Wielage (Ed.). Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde: in Chemnitz 2011; 30.03. - 01.04.2011. IWW, Chemnitz, 103-108
BibTeX | RIS

Siddhartha Roy, Jörg-Martin Gebert, Galyna Stasiuk, Romana Piat, Kay A. Weidenmann and Alexander Wanner. 2011. Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling. Materials Science and Engineering: A 528, 28, 8226-8235. DOI: 10.1016/j.msea.2011.07.029
BibTeX | RIS | DOI

Th. Kloppenborg, A. Reeb, Matthias Merzkirch, Kay A. Weidenmann, A. Brosius and A. E. Tekkaya. 2011. Effiziente Strangpresssimulation für industrielle Anwendungen. In A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II, 1. Januar 2007 bis 31. Dezember 2010. VDI-Verlag, Düsseldorf (VDI-Berichte ; 678), 457-466.
PDF | BibTeX | RIS

S. Roy, O. Stoll, Kay A. Weidenmann, A. Nagel and A. Wanner. 2011. Elastic properties of an interpenetrating metal matrix composite. In Bernhard Wielage (Ed.). Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011, 30.03. - 01.04.2011. IWW, Chemnitz (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41), 139-144.
BibTeX | RIS

T. Hammers, Kay A. Weidenmann and V. Schulze. 2011. Ermüdung an rührreibgeschweißten, federstahldrahtverstärkten EN AW-6060-Matrixverbunden. In Bernhard Wielage (Ed.). Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011, 30.03. - 01.04.2011. IWW, Chemnitz (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41), 381-386.
BibTeX | RIS

Frank Henning, Kay A. Weidenmann and Bernd Bader. 2011. Fertigungsrouten zur Herstellung von Hybridverbunden. In Frank Henning and Elvira Moeller (Ed.). Handbuch Leichtbau. Carl Hanser Verlag, München, 723-740. DOI: 10.3139/9783446428911.025
BibTeX | RIS | DOI

Frank Henning and Kay A. Weidenmann. 2011. Hybride Werkstoffverbunde. In Frank Henning and Elvira Moeller (Ed.). Handbuch Leichtbau. Carl Hanser Verlag, München, 413-428. DOI: 10.3139/9783446428911.016
BibTeX | RIS | DOI

Barthel Brylka, Felix Fritzen, Thomas Böhlke and Kay A. Weidenmann. 2011. Influence of micro-structure on fibre push-out tests. PAMM 11, 1, 141-142. DOI: 10.1002/pamm.201110062
BibTeX | RIS | DOI

Jan Kuppinger, Florian Wafzig, Frank Henning, Kay A. Weidenmann, Benedikt Haspel and Peter Elsner. 2011. Influence of processing conditions, fiber contents and fiber lengths on fiber orientation in the polyurethane fiber spraying process. Journal of Plastics Technology 2011, 2, 44-65.
BibTeX | RIS | URL

Kay A. Weidenmann, R. Tavangar and L. Weber. 2011. Influence of thermal cycling on the mechanical properties of Al/diamond composites. In Bernhard Wielage (Ed.). Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011, 30.03. - 01.04.2011. IWW, Chemnitz (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41), 40-45.
BibTeX | RIS

S. Roy, J. Gibmeier, V. Kostov, Kay A. Weidenmann, A. Nagel and A. Wanner. 2011. Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure. Acta Materialia 59, 4, 1424-1435. DOI: 10.1016/j.actamat.2010.11.004
BibTeX | RIS | DOI

Matthias Merzkirch, Kay A. Weidenmann and Volker Schulze. 2011. Investigations on the cyclic crack growth behaviour of spring steel wire reinforced EN AW-6082. In Sergio N. Monteiro, Dirk E. Verhulst, Prince N. Anyalebechi, Joseph A. Pomykala (Eds.). EPD Congress 2011. John Wiley and Sons, Hoboken, NJ, 135-142 DOI: 10.1002/9781118495285.ch17
BibTeX | RIS | DOI

V. Schulze, C. Becke, Kay A. Weidenmann and S. Dietrich. 2011. Machining strategies for hole making in composites with minimal workpiece damage by directing the process forces inwards. Journal of Materials Processing Technology 211, 3, 329-338. DOI: 10.1016/j.jmatprotec.2010.10.004
BibTeX | RIS | DOI

T. Kloppenborg, M. Schwane, M. Fiderer, A. Reeb, N. Ben Khalifa, Kay A. Weidenmann, A. Brosius and A. E. Tekkaya. 2011. Numerical analysis of the seam welds of industrial extrusion profiles. International Aluminium Journal 2011, 72-74.
BibTeX | RIS

B. Drach, I. Tsukrov, T. Gross, S. Dietrich, Kay A. Weidenmann, R. Piat and T. Böhlke. 2011. Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes. International Journal of Solids and Structures 48, 18, 2447-2457. DOI: 10.1016/j.ijsolstr.2011.04.021
BibTeX | RIS | DOI

A. Reeb, A. Ohl, K. Poser, T. Kloppenborg, A. Brosius, A. E. Tekkaya and Kay A. Weidenmann. 2011. Präparations- und Ätzmethodik zur lichtmikroskopischen Analyse von Strangpressnähten und Gefügekontrastierung für die Aluminiumlegierungen EN AW-6063 und EN AW-6082. In A. Wanner and M. Rettenmayr (Ed.). Fortschritte in der Metallographie: Vortragstexte der 45. Metallographie-Tagung, 14.-16. September 2011 in Karlsruhe. MAT INFO, Werkstoff-Informationsgesellschaft, Frankfurt am Main (Sonderbände der praktischen Metallographie ; 43), 31-36.
BibTeX | RIS

S. Dietrich, Kay A. Weidenmann, J. Kuppinger and P. Elsner. 2011. Prüfung und Modellierung von Sandwichstrukturen aus dem Deckschicht-Sprühprozess. In Bernhard Wielage (Ed.). Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011, 30.03. - 01.04.2011. IWW, Chemnitz (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41), 492-498.
BibTeX | RIS

Th. Hammers, Kay A. Weidenmann and V. Schulze. 2011. Struktur-Eigenschaft-Beziehungen von Fügezonen. In A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase 2, 1. Januar 2007 - 31. Dezember 2010. VDI-Verlag, Düsseldorf (VDI-Berichte ; 678), 143-167.
BibTeX | RIS

Kay A. Weidenmann and A. Wanner. 2011. Werkstoffauswahl für den Leichtbau. In Frank Henning and Elvira Moeller (Ed.). Handbuch Leichtbau. Carl Hanser Verlag, München, 157-189. DOI: 10.3139/9783446428911.008
BibTeX | RIS | DOI

Matthias Merzkirch, Kay A. Weidenmann and V. Schulze. 2011. Werkstoffkundliche Charakterisierung verbundstranggepresster Leichtmetallmatrix-Verbundwerkstoffe. In A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II, 1. Januar 2007 bis 31. Dezember 2010. VDI-Verlag, Düsseldorf (VDI-Berichte ; 678), 49-72.
PDF | BibTeX | RIS

J.-M. Gebert, B. Reznik, R. Piat, B. Viering, Kay A. Weidenmann, A. Wanner and O. Deutschmann. 2010. Elastic constants of high-texture pyrolytic carbon measured by ultrasound phase spectroscopy. Carbon 48, 12, 3647-3650. DOI: 10.1016/j.carbon.2010.06.002
BibTeX | RIS | DOI

Oliver Deisser, Olaf Rüger, Raman Chaudhari, Manfred Grigo, Kay A. Weidenmann, Martin Holzapfel, Frank Henning and Michael Kriescher. 2010. Hybrid beam structures for light weight design - overbraided hybrid beams. In 1st International Conference on Materials for Energy, 4. - 8. Juli 2010, Karlsruhe, Germany.
BibTeX | RIS

Kay A. Weidenmann, Eberhard Kerscher and Matthias Merzkirch. 2010. In situ damage detection with acoustic emission analysis during cyclic loading of wire reinforced EN AW-6082. Advanced Engineering Materials 12, 7, 637-640. DOI: 10.1002/adem.200900313
BibTeX | RIS | DOI

Jan Kuppinger, Florian Wafzig, Frank Henning and Kay A. Weidenmann. 2010. Influence of fibre length and concentration on the mechanical properties of long glass fibre reinforced polyurethane. Journal of Plastics Technology 2010, 5, 205-227.
BibTeX | RIS | URL

Kay A. Weidenmann, Eberhard Kerscher and Thilo Hammers. 2010. Mechanical properties of compound extruded aircraft stringer profiles under cyclic loading. Advanced Engineering Materials 12, 7, 584-586. DOI: 10.1002/adem.200900327
BibTeX | RIS | DOI

R. Piat, S. Dietrich, J.-M. Gebert, G. Stasiuk, Kay A. Weidenmann, A. Wanner, T. Böhlke, B. Drach, I. Tsukrov and A. Bussiba. 2010. Micromechanical modeling of CFCs using different pore approximations. In Walter Krenkel, Jacques Lamon (Eds.). High temperature ceramic materials and composites: proceedings 7th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC 7), September 20-22, 2010 in Bayreuth, Germany. AVISO Verlagsgesellschaft, Berlin, 590-597
BibTeX | RIS

Stefan Dietrich, Jan Kuppinger, Peter Elsner and Kay A. Weidenmann. 2010. Small mass impact testing of sandwich structures. Materials Testing 52, 11-12, 765-770. DOI: 10.3139/120.110184
BibTeX | RIS | DOI

Barthel Brylka, Felix Fritzen, Thomas Böhlke and Kay A. Weidenmann. 2010. Study of experimental methods for interface problems based on virtual testing. PAMM 10, 1, 109-110. DOI: 10.1002/pamm.201010047
BibTeX | RIS | DOI

Kay A. Weidenmann, T. Hammers, Matthias Merzkirch and E. Kerscher. 2009. Charakterisierung des mechanischen Verhaltens verbundstranggepresster Leichtbauprofile unter schlagartiger Beanspruchung. In Walter Krenkel (Ed.). Verbundwerkstoffe: 17. Symposium Verbundwerkstoffe und Werkstoffverbunde. Wiley-VCH Verlag, Weinheim, 168-173 DOI: 10.1002/9783527627110.ch23
PDF | BibTeX | RIS | DOI

Peter Elsner, Frank Henning and Kay A. Weidenmann. 2009. Composite materials. In Hans-Jörg Bullinger (Ed.). Technology Guide: Principles – Applications – Trends. Springer, Berlin, 24-29. DOI: 10.1007/978-3-540-88546-7_5
BibTeX | RIS | DOI

Kay A. Weidenmann, R. Tavangar and L. Weber. 2009. Mechanical behaviour of diamond reinforced metals. Materials Science and Engineering: A 523, 1-2, 226-234. DOI: 10.1016/j.msea.2009.05.069
BibTeX | RIS | DOI

T. Hammers, Matthias Merzkirch, Kay A. Weidenmann and E. Kerscher. 2009. Mechanisches Verhalten ausgewählter Werkstoffsysteme verbundstranggepresster Leichtbauprofile unter quasistatischer Belastung. In Walter Krenkel (Ed.). Verbundwerkstoffe: 17. Symposium Verbundwerkstoffe und Werkstoffverbunde. Wiley-VCH Verlag, Weinheim, 155-161 DOI: 10.1002/9783527627110.ch21
PDF | BibTeX | RIS | DOI

A. Ohl, Matthias Merzkirch, M. Grigo, B. Butz and Kay A. Weidenmann. 2009. Präparation von Dünnschliffen aus langfaserverstärkten Verbundwerkstoffen mit Polymer- oder Aluminiummatrizes zur Bestimmung der Grenzflächenscherfestigkeit mittels Push-Out-Test. In Andreas Bührig-Polaczek, Albert Kneissl (Eds.). Fortschritte in der Metallographie: Vortragstexte der 43. Metallographie-Tagung, 16. - 18. September 2009 in Aachen. MAT-INFO, Werkstoff-Informationsgesellschaft, Frankfurt am Main, 99-104
BibTeX | RIS

Kay A. Weidenmann, R. Tavangar and L. Weber. 2009. Rigidity of diamond reinforced metals featuring high particle contents. Composites Science and Technology 69, 10, 1660-1666. DOI: 10.1016/j.compscitech.2009.03.016
BibTeX | RIS | DOI

C. Held, J. Dadrich, R. Denninger, R. Schleich, Kay A. Weidenmann and M. Liewald. 2009. Semi-empirische Berechnungsmethode zur Bestimmung des Grenzformänderungsdiagramms auf Basis mechanischer Kennwerte. Materialwissenschaft und Werkstofftechnik 40, 11, 831-835. DOI: 10.1002/mawe.200900514
BibTeX | RIS | DOI

Th. Hammers, Matthias Merzkirch, Kay A. Weidenmann and V. Schulze. 2009. Struktur-Eigenschafts-Beziehungen von Fügestellen. In A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht der Phase 2, 1. Januar 2007 bis 31. Dezember 2008. VDI-Verlag, Düsseldorf (VDI-Berichte ; 668), 115-131.
PDF | BibTeX | RIS

T. Hammers, D. Pietzka, T. Kloppenborg, Kay A. Weidenmann, E. Kerscher, M. Schikorra, A. E. Tekkaya and D. Löhe. 2009. T1 - Verbesserung der Werkstoff- und Bauteileigenschaften von Luftfahrtstringern durch Verbundstrangpressen. In A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht der Phase 2, 1. Januar 2007 bis 31. Dezember 2008. VDI-Verlag, Düsseldorf (VDI-Berichte ; 668), 351-369.
BibTeX | RIS

M. Grigo, Kay A. Weidenmann and P. Elsner. 2009. Untersuchungen zum Verhalten von langfaserverstärkten Thermoplasten unter mechanischer Beanspruchung. In Walter Krenkel (Ed.). Verbundwerkstoffe: 17. Symposium Verbundwerkstoffe und Werkstoffverbunde. Wiley-VCH Verlag, Weinheim, 361-367. DOI: 10.1002/9783527627110.ch50
BibTeX | RIS | DOI

Matthias Merzkirch, Kay A. Weidenmann, E. Kerscher and D. Löhe. 2009. Werkstoffsysteme für verstärkte Leichtbauprofile. In A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht der Phase 2, 1. Januar 2007 bis 31. Dezember 2008. VDI-Verlag, Düsseldorf (VDI-Berichte ; 668), 45-64.
PDF | BibTeX | RIS

T. Hammers, E. Kerscher, D. Löhe and Kay A. Weidenmann. 2008. Composites I: mechanical properties of compound extruded unidirectional reinforced aluminum alloys under quasi-static loading. In Jürgen Hirsch, Birgit Skrotzki and Günter Gottstein (Ed.). Aluminium Alloys: their physical and mechanical properties [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany] - Volume 2: Their Physical and Mechanical Properties. Wiley-VCH, Weinheim, 2245-2250.
BibTeX | RIS

Matthias Merzkirch, Kay A. Weidenmann, Eberhard Kerscher and Detlef Löhe. 2008. Documentation of the corrosion of composite-extruded aluminium matrix extrusions using the push-out test. Advanced Materials Research 43, 17-22. DOI: 10.4028/www.scientific.net/amr.43.17
BibTeX | RIS | DOI

Kay A. Weidenmann, A. M. Klaska, E. Kerscher and D. Löhe. 2008. Gefüge hybrider Verbundstrangpressprofile auf Aluminiumbasis / Microstructure of hybrid composite extrusions with aluminum-based matrices. Praktische Metallographie 45, 11, 533-545.
BibTeX | RIS

Kay A. Weidenmann, Eberhard Kerscher and Detlef Löhe. 2008. Gefüge und Eigenschaften verbundextrudierter Aluminiumlegierungen. Materials Testing 50, 3, 133-141. DOI: 10.3139/120.100867
BibTeX | RIS | DOI

Matthias Merzkirch, Kay A. Weidenmann, Eberhard Kerscher, Detlef Löhe, Daniel Pietzka, M. Schikorra and A. Erman Tekkaya. 2008. Mechanical properties of hybrid composite extrusions of an aluminum-alumina wire reinforced aluminum alloy. In Materials Science and Technology, MS&T 2008, October 5-9, 2008, Pittsburgh, Pennsylvania, USA. Curran, Red Hook, NY, 2552-2562
BibTeX | RIS

Matthias Merzkirch, Kay A. Weidenmann, Eberhard Kerscher and Detlef Löhe. 2008. The use of acoustic emission to determine damage evolution during cyclic loading of wire reinforced AlSiMg0.5. In Pedro Dolabella Portella, Tilmann Beck, Masakazu Okazaki (Eds.). Sixth International Conference on Low Cycle Fatigue, LCF 6, Berlin, Germany, September 8-12, 2008. DVM, Berlin, 649-654
BibTeX | RIS

Kay A. Weidenmann, A. Klaska, Eberhard Kerscher and Detlef Löhe. 2007. Gefüge hybrider Verbundstrangpressprofile auf Aluminiumbasis. In Hermann Vetters and Frank Mücklich (Ed.). Fortschritte in der Metallographie: Vortragstexte der 41. Metallographie-Tagung, 19. - 21. September 2007 in Bremen. MAT-INFO, Werkstoff-Informationsgesellschaft, Frankfurt am Main (Sonderbände der praktischen Metallographie ; 39), 231-236.
BibTeX | RIS

Kay A. Weidenmann, Claudia Fleck, Volker Schulze and Detlef Löhe. 2007. Mechanical properties of rope-reinforced aluminium extrusions under quasistatic loading conditions. International Journal of Materials Research 98, 1, 39-46. DOI: 10.3139/146.101434
BibTeX | RIS | DOI

Kay A. Weidenmann, E. Kerscher, Volker Schulze and D. Löhe. 2007. Werkstoffsysteme für verstärkte Leichtbauprofile. In Matthias Kleiner and A. E. Tekkaya (Ed.). Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I, 1. Januar 2003 bis 31. Dezember 2006. VDI-Verlag, Düsseldorf (VDI-Berichte ; 661), 69-105.
BibTeX | RIS

Kay A. Weidenmann, Th. Schwind, E. Kerscher and D. Löhe. 2007. Zyklische Beanspruchung drahtverstärkter Verbundstrangpressprofile mit Aluminiummatrix. Materialwissenschaft und Werkstofftechnik 38, 2, 75-78. DOI: 10.1002/mawe.200600112
BibTeX | RIS | DOI

Kay A. Weidenmann, E. Kerscher, V. Schulze and D. Löhe. 2006. Characterization of the interfacial properties of compound-extruded lightweight profiles using the push-out-technique. Materials Science and Engineering: A 424, 1-2, 205-211. DOI: 10.1016/j.msea.2006.03.038
BibTeX | RIS | DOI

C. Fleck, A. Schildknecht, Kay A. Weidenmann, A. Wanner and Detlef Löhe. 2006. Corrosion fatigue behaviour of newly developed microalloyed Mg wrought alloys. In K. U. Kainer (Ed.). Magnesium: proceedings of the 7th International Conference Magnesium Alloys and their Applications. Wiley-VCH, Weinheim, 1062-1068.
BibTeX | RIS

Kay A. Weidenmann, Georg Rixecker and Fritz Aldinger. 2006. Liquid phase sintered silicon carbide (LPS-SiC) ceramics having remarkably high oxidation resistance in wet air. Journal of the European Ceramic Society 26, 13, 2453-2457. DOI: 10.1016/j.jeurceramsoc.2005.05.015
BibTeX | RIS | DOI

Kay A. Weidenmann, Eberhard Kerscher, Volker Schulze and Detlef Löhe. 2006. Mechanical properties of compound-extruded aluminium-matrix profiles under quasi-static loading conditions. Advanced Materials Research 10, 23-34. DOI: 10.4028/www.scientific.net/amr.10.23
BibTeX | RIS | DOI

Kay A. Weidenmann. 2006. Werkstoffsysteme für verbundstranggepresste Aluminiummatrixverbunde. Shaker, Aachen (Schriftenreihe Werkstoffwissenschaft und Werkstofftechnik ; 33).
BibTeX | RIS

Th. Schwind, Kay A. Weidenmann, Eberhard Kerscher, K.-H. Lang and Detlef Löhe. 2006. Werkstoffverhalten drahtverstärkter Verbundstrangpressprofile mit Aluminiummatrix unter zyklischer Beanspruchung. In Fortschritte der Kennwertermittlung für Forschung und Praxis - Tagung Werkstoffprüfung 2006, Neuenahr. Stahleisen, Düsseldorf, 325-332.
BibTeX | RIS

Kay A. Weidenmann. 2006. Zyklische Beanspruchung drahtverstärkter Verbundstrangpressprofile mit Aluminiummatrix. In Bernhard Wielage (Ed.). Verbundwerkstoffe und Werkstoffverbunde : Tagungsband zum 9. Werkstofftechnischen Kolloquium in Chemnitz, 7. bis 8. September 2006. TU, Lehrstuhl für Verbundstoffe, Chemnitz (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 24), 40-46.
BibTeX | RIS

Kay A. Weidenmann, C. Fleck, V. Schulze and D. Löhe. 2005. Analyse der Mikrostruktur und des Eigenspannungszustandes seilverstärkter Aluminiumstrangpressprofile. Materialwissenschaft und Werkstofftechnik 36, 7, 307-312. DOI: 10.1002/mawe.200500878
BibTeX | RIS | DOI

Kay A. Weidenmann, M. Schomäcker, E. Kerscher, D. Löhe and M. Kleiner. 2005. Composite extrusion of aluminium matrix specimens reinforced with continuous ceramics fibres. Light Metal Age 2005, October, 6-10.
BibTeX | RIS | URL

Kay A. Weidenmann, Georg Rixecker and Fritz Aldinger. 2005. Flüssigphasenverdichtete Siliciumcarbidkeramiken mit hoher Oxidationsbeständigkeit an feuchter Atmosphäre.
BibTeX | RIS

Kay A. Weidenmann, Eberhard Kerscher, V. Schulze and Detlef Löhe. 2005. Grenzflächen in Verbundstrangpressprofilen auf Aluminiumbasis mit verschiedenen Verstärkungselementen. In Mathias Göken (Ed.). Fortschritte in der Metallographie - Vortragstexte der 39. Metallographie-Tagung, 14. - 16. September 2005 in Erlangen. MAT-INFO, Werkstoff-Informationsgesellschaft, Frankfurt am Main (Sonderbände der praktischen Metallographie ; 37), 131-136.
BibTeX | RIS

Kay A. Weidenmann, C. Fleck and V. Schulze. 2005. Grenzflächencharakterisierung in drahtverstärkten Verbundstrangpressprofilen mit Aluminiummatrix. In M. Schlimmer (Ed.). Verbundwerkstoffe und Werkstoffverbunde: Vortragstexte des 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde, 6. - 8. April 2005, Kassel. MAT-INFO, Werkstoff-Informationsgesellschaft, Frankfurt am Main, 45-50.
BibTeX | RIS

Kay A. Weidenmann, C. Fleck, V. Schulze and D. Löhe. 2005. Materials selection process for compound-extruded aluminium matrix composites. Advanced Engineering Materials 7, 12, 1150-1155. DOI: 10.1002/adem.200500172
BibTeX | RIS | DOI

W. Tillmann, E. Vogli, Kay A. Weidenmann and C. Fleck. 2005. Reinforced lightweight composite materials. In E. Lugscheider (Ed.). Thermal spray connects: explore its surface potential!, ITSC 2005, International Thermal Spray Conference & Exposition, Basel, Switzerland, May 2-4, 2005. DVS, Düsseldorf
BibTeX | RIS

D. Löhe, V. Schulze, C. Fleck and Kay A. Weidenmann. 2004. Verbundstranggepresste Aluminiummatrixverbunde - Werkstoffauswahl und Charakterisierung ausgewählter Metall-Metall-Systeme. Aluminium - International Journal for Industry, Research and Application 80, 12, 1374-1377.
BibTeX | RIS